UHP-1100 SATELLITE ROUTER BOARD
GENERAL DESCRIPTION AND INSTALLATION GUIDE, v3.2
© UHP Networks Inc. 2015
14
www.uhp.net
3.
OPERATIONS
UHP Routers belong to the class of unattended equipment and during its operation does not require any special
staff exploitation. When operated as SCPC station or TDM/TDMA terminal the satellite router does not require any
changes of settings or it is configured remotely from the Hub. The tasks of operational staff are limited to the
following:
Monitoring of climatic environment of operation, ensuring the absence of dust, preventing the ingress of
moisture on the surface of the device. Should provide unrestricted air access to router for cooling.
Cables connected to the device must not suffer any significant impact on the connections of the router.
All connectors must be properly attached and secured.
3.1
Software updates
One of the key advantages of UHP satellite routers is the ability to extend the functionality by updating the
software. Software updates also include fixes for known bugs and improving the algorithms of the system.
3.2
Powering off
To power the router off the Power Supply should be disconnected from AC power. If the device is
powered by a low-voltage DC source, it can be powered off by disconnecting the DC cord from DC IN
connector of the router.
3.3
Safety instructions for operations
Connect and disconnect any cables only when router is powers off;
Do not try to repair the router and not use it for other purposes;
3.4
Actions in case of fire
In case of fire or any smoke of the router please immediately power off the device and if necessary, use
extinguishing tools that are intended for electrical circuits.
