uhlmann & zacher CX8946, Инструкция по эксплуатации и сборке для клиента

Страница: 20 / 23

CX8946 O
PERATION
19
6.4 Signaling
LED Meaning
Blue
1x lighting up after
reset Normal signaling after a reset
Blue
2x/s flashing Module tries to wake up a locking unit in the "wake
on radio" mode (WOR) or service mode
Blue
1x/s flashing, but
with more time
"on” Module has connection to at least one paired
locking unit, but is simultaneously scanning for
further paired devices
Blue
constant lighting
up All paired locking units are connected
Blue
1x/s flashing Module is scanning for paired locking units
Green
rapid flashing Network connection is established and IP address is
being called
Green
slow flashing The module can be reached as a Wi-Fi access
point to carry out the initial configuration (see
section 5.2.3 Configuration of the network
interface)
Green
constant lighting
up Network connection has been established
(Only for initial connecting. No function for
disconnection during operation)
Red LED Is currently not used
6.5 Malfunctions during operation/error signaling
LED Meaning
Blue lights up 4x
quickly after a reset;
after that service
mode Mode wrong for the available firmware:
Perform a firmware update or set the mode
manually.
Blue lights
constantly after a
reset Micro-controller of the device is in boot loader
mode. Perform a suitable firmware update.
6.6 Maintenance
Since the device is not protected specially against dust, the product should be
checked regularly for dust deposits. The frequency depends on the dust level at
the operation site.
10
11
12
10