uhlmann & zacher CX8946, Инструкция по эксплуатации и сборке для клиента, Страница: 16 / 23

CX8946 C
OMMISSIONING
15
5.2.3 Configuration of the network interface
To carry out own settings of the IP addresses, the CX8946 has a web interface.
This can be addressed either via the LAN interface or the Wi-Fi interface of the
CX8946.
For the configuration the CX8946 acts as a Wi-Fi Access Point (hotspot). You
require a mobile device with activated Wi-Fi for the configuration.
To start the Access Point, button 7 must be held down while the unit performs a
reset.
After that all LAN-specific settings are reset to the factory state.
The
pairing of the locking units remains

Open the Wi-Fi device menu of your mobile device.
 Keep the button pressed.
 Tap the reset button or optionally reconnect the LAN cable.
 Continue to hold down the button for at least one second until a Wi-Fi
network with the SSID: "FSMLanConfig" is displayed in the Wi-Fi menu of
your mobile device.

Release the button.

Tap on the list entry "FSMLanConfig”.

Enter the password StartConfig
The web interface now starts automatically in a browser window.
Alternatively, it can also be opened via the IP address 192.168.4.1 in a web
browser.
For security reasons, be sure to assign a new secure password in the web
interface.
Starting via Wi-Fi
7
8
7
7