CX8942
C
OMMISSIONING
15
Tap the button "Configure network".
Select the "HTTP Basic Auth" under the item "Configure portal protection".
Select a secure password for the user "admin".
If the module is started by pressing the button in the Wi-Fi configuration mode as
described above, the LAN interface is not active. If the module is started without
pressing the button as described above, the website can be reached via the
address received via DHCP.
5.2.4
IP address in network
By default, the online module can automatically obtain an IP address via DHCP
when it is connected to a network. The automatically assigned address can then,
for example, be displayed with the test application of the UZReader protocol
"ClexSerUZ_ReaderTest". In addition, the module should also appear in the web
interface of the router. The address can be viewed there as well.
Select the option "Static IPv4" in the web interface under "Configure network" in
the "Ethernet settings".
Changing the
password
Access to
configuration tool via
LAN connection
Assignment via DHCP
Manual input of a
static IP address
