CX6172/4
T
ABLE OF CONTENTS
25
The oval rosette version is mostly used for tubular frame doors. These doors
often have pressed threaded bushes, such that the base plate has to just be
screwed onto the door. Other types of attachment depend on the various
door designs and are not explained here.
Pull the rosette cover of the electronic door handle back, turn by 90° and
screw the electronic door handle onto the door panel. Insert the holder of the
mechanical door handle from the other side and screw it to the door panel
as well. Use the supplied mounting screws.
Replace the rosette cover of the electronic door handle on the rosette.
Insert the mechanical door handle keeping it in a horizontal position. For
door handles pointing to the right, tighten the rosette towards the left, guide it
over the handle holder and engage the bayonet lock. Accordingly, tighten the
rosette towards the right for door handles pointing to the left.
Insert the locking screw from the bottom of the handle and tighten it.
Check the functionality and easy movement of the door handle with the door
open. The handle is already engaged when delivered.
When engaged, the catch of the lock should be completely inside the lock
casing when the latch is pressed down.
To operate the door handle, insert the battery and close the housing (see
chapter 7.2.17.2.1 Battery replacement). The electronic door handle
disengages only after the battery is inserted.
After holding up an authorized key for the first time, only the two upper LEDs
light up as an indication.
Oval rosette
