C o p y r i g h t b y U h l - I n s t r u m e n t s M a n u a l
Seite 14
Reverb, Separate Bass, Split
REV1 REV2 REV3 (REV1 + REV2) SPLIT
Reverb:
The X4 V features a well-balanced reverb which emulates a vintage spring reverb.
There are four reverb levels available: OFF, REV 1, REV 2 and REV 3.
To activate the reverb press one of the buttons [REV1] or [REV2]. To obtain reverb level REV3 both buttons
[REV1+ REV2] must be pressed simultaneously. The individual levels of REV1, REV2, and REV3 can be adjusted
to taste in the Menu/Display panel (see page 23).
Split-Mode:
Keyboard split is available for the lower or upper manual with a selectable split point.
Two keyboard zones are
easily set up by assigning any desired key split zones.
Lower to Upper:
Lower to Upper:
Press the key of the desired split point on the upper manual, hold while
pressing the [Split] button. Now the left part of the keyboard plays the Lower Manual. Use the right-hand
drawbars to adjust the Lower Manual sound.
Pedal to Upper
: Press two adjacent keys at the desired split point on the upper manual, hold both keys while
pressing the [Split] button. Now the left part of the keyboard plays the Pedal Bass. Use the Pedal Bass drawbars
to adjust the Pedal Bass sound.
Pedal to Lower (X4 V-2 only!):
Press two adjacent keys at the desired split point on the lower manual, hold both
keys while pressing the [Split] button. Now the left part of the lower keyboard plays the Pedal Bass. Use the
Pedal Bass drawbars to adjust the Pedal Bass sound.
Note:
see also „Split-Mode“on Page 25
Sep.
(Separate bass): The pedal bass is always
separately available at the "Separate Bass" output
socket on the back of the organ.
With the "Sep." button you can switch off the
pedal bass at the outputs "Main-Out L + R" "Pure
Organ" and "11-Pin". The pedal bass is now
connected to the mixer via the "Separate Bass"
output. Now you can mix the Pedalbass
completely detached from the rest of the organ
(volume, possibly EQ).
