5
RX Mode Connection
Connecting to the one phone
1.
Set the switch button to
“
RX
”
2.
Connect the product to your devices (e.g. amplifier, speaker) with the 3.5mm audio
cable
3.
Plug USB-A of the product into a USB power source (e.g. PC/laptop, TV, charger)
and then the product will power on automatically with LED indicator glowing for 1
second and voice prompt saying
“
Power on
”
; subsequently, the product enters
pairing mode, LED indicator blinking blue and red alternately.
4.
Search and connect to
“
UGREEN-60300
”
on the Bluetooth list of your phone, LED
indicator will blink blue slowly and voice prompt will say
“
Bluetooth connected
”
if
pairing is successful.
Connecting to two phones
1.
According to
“
Connecting to one phone
”
, connect the product to the first phone
and turn off its Bluetooth.
2.
Search and connect to
“
UGREEN-60300
”
on the second phone.
3.
Turn on Bluetooth of the first phone and it will automatically reconnect to the
product Bluetooth (If it doesn
’
t reconnect, please operate manually from the
Bluetooht list)
4.
Play music on either phone, if music plays normally, then it means that one-to-two
pairing successful.
Tip:
1.
Press MFB once to play/pause music or take/end calls; press and hold MFB for 2
seconds to reject calls. All the functions are only available in RX mode.
2.
After connected to two phones, you can only play music on one phone at a time.
When you need to switch to the other, please pause music on the first phone then
play music on the other one.
Bluetooth Connection Failure & Solution
When Bluetooth connection fails, make sure the product is turned on and press MFB five
times until LED glows solid blue for 5 seconds, indicating that resetting is successful.
Phone
Speaker
