General
Treadmill Airpuff >
7
Adapt the AirPuff assembly for mice or for rats
While the Treadmill can be used for rats or for mice, you need to configure the system before
running the test, you also need to prior decide if you want to use the AirPuff or the standard
shock incentive.
Treadmill wise if you need to use mice please load the lane assembly for mice (6 lane) and refer
to the Treadmill instruction manual for infos.
If you need to use the Treadmill with rats, please load the 3 lane assembly for rats.
If you choose to use the standard electric schock assembly, please refer to the Treadmill instruc-
tion manual.
If you choose to use the Air Puff incentive assembly you need to configure it depending the ani
-
mal you will use.
To configure your AirPuff for the use with rats or with mice you need to change the metal plug
positions.
As standard AirPuff assembly is configured to be used with mice, if you need to use with rats
please change the plug position as follow:
To remove a plug from the assembly use the provided alley key tool and unscrew (turning un-
clockwise)
To mount the plug screw it in, turning clockwise but please pay attention to avoid tighten too
much.
Here follow the mice and rats plug configuration:
MICE CONFIGURATION
RATS CONFIGURATION
Air flow blockage nuts
Air flow nozzle
