Mic100P V2 Light Source
4
MAINTENANCE
Disconnect unit from power supply and allow to cool before attempting any
cleaning of the unit.
A visual check of the unit should be completed every 12 months. However cleaning
should take place as and when required.
The body of the unit can be cleaned with a soft, damp cloth - do not use any
abrasives on the unit.
CLEANING THE UNIT
CONNECTION
There are 2 connections required - the fiber port and the mains supply. The fiber
port should be connected first. Connect and secure the fiber optic connector into
the front of the unit, and secure using the M5 locking screw.
Plug the mains plug into the electrical supply socket. Switch on the power, the LED
indicator will illuminate, and the illuminator and the decorative wheel will start up
automatically. If no light is produced consult the troubleshooting section.
NOTE: THESE ILLUMINATORS ARE NOT MAINS DIMMABLE
.
