There are 2 connections required - the fiber port and the mains supply. The fiber port should be
connected first. Connect and secure the fiber optic connector into the front of the unit and
secure using the M5 locking screw.
Plug the mains plug into the electrical supply socket. Switch on the power, the LED indicator
will illuminate, and the illuminator will illuminate. If no light is produced consult the
troubleshooting section
CONNECTION
OPERATION
OPERATION
MICROLED
100
PD
USER
GUIDE
4
This is a standard static decorativewhite light unit. Once setup according to the connection
instructions the unit is ready for use.
The unit has two control push buttons on the rear. These buttons are push and release
momentary action type.
Upper button:
controls motor speed
Lower button:
controls dimming
- Twinkle effect (PT models)
- Color change effect with 6 color segments (PC models)
- Color change / twinkle sandwiched (PCT models)
AVAILABLE
WHEEL
OPTIONS
