There are 2 connections required - the fiber port and the mains supply. The fiber port should be
connected first. Connect and secure the fiber optic connector into the front of the unit and
secure using the M5 locking screw.
Plug the mains plug into the electrical supply socket. Switch on the power, the LED indicator
will illuminate, and the illuminator will illuminate. If no light is produced consult the
troubleshooting section.
CONNECTION
This illuminator is a static white unit with no control options. Once set up as detailed in the con-
nection section of this manual the unit is ready for use.
OPERATION
INSTALLATION
&
OPERATION
MICROLED
100
P
USER
GUIDE
4
