UFO AWP305, Руководство пользователя

Страница: 8 / 21

(b) It is suggested as shown in the picture (a) to use your hand to hold the
mouse while your thumb should slightly press the upper cover of the
sliding plate, at this time your index finger should touch the right button
and the middle finger touch the left button (left-handed should use the
index finger and middle finger to separately touch left and right button).
(c) When you want to move the cursor, you must press down the cap of the
sliding plate (as shown in picture (b)) while sliding it upwards or
downwards, left or right or to any direction (as shown in picture (c)), at
this time the cursor will move following the direction where the sliding
plate moves. If the sliding plate moves and its cap is not pressed down,
the cursor won’t move either, therefore you may move the sliding plate in
the opposite direction back to its original position and control the cursor
to keep moving towards the same direction. Its operation method is the
same as an ordinary mouse in the sense that we must put down the
mouse on the desk to move the cursor and when we need to move the
mouse back we need to lift the mouse up so the cursor position is not
affected.
(d) The operation method of left/right button and the scrolling wheel is
exactly the same as an ordinary mouse.
8-2.2 Using fingers to operate the mouse
When a high accuracy in the cursor is not necessary, you can directly use
your thumb and cover the optical hole to operate it, the method is as below:
(a) While moving the cursor your thumb should slide by the optical detector
hole and move it to any direction (as shown in picture), at this moment
the cursor will move following the direction of the thumb. When the
mouse cursor moves to a position then you can use the left and right
button to proceed with the different operations.
(c)
7
(b) (a)