28
5-3.
Reset key function
Mode
Pressing and Holding time
0-3Sec
3-6Sec
>6Sec
Normal
Indication by SOC
Transfer to Sleeping mode
Reset
Sleeping Mode
Wake up from Sleeping mode
5.3.1 Battery parameters collection page
When the cursor
“》”
is point to
“
Battery Parameters Acquisition
”，
press ENTER key will enter into
the page of
“
Battery Parameters Acquisition
”，
As shown in the figure below
5.3.2 Key description
1) SW1----NEMU
，
SW2----ENTER
，
SW3----DOWN
，
SW4
----
ESC.
2) Each item is
“》”
or
“
--
”
as a beginning
，
among them
“》”
shows the current cursor position
，
press UP or DOWN key can move the cursor position
；
with
“》”
end of the project
，
the content of the
said project has not shown, press ENTER key can enter the corresponding page.
3) Press ESC key can be returned at the next higher level directory
；
In any position
，
press NEMU key
can return to the main menu page.
4) In a dormant state, press any key, can activate the screen.
5.3.3 Dormancy/shutdown
Under normal operation condition, with no keystrokes 1 minutes later, system will enter a state of
dormancy/shutdown.Shutdown/dormancy state
，
press any key
，
screen can be activated.
6. Troubleshooting
If the battery does not operate correctly, please solve the problem by using the table below.
