UfiSpace S9502-12SM, Руководство по установке оборудования

Страница: 19 / 27

S9502-12SM Hardware Installation Guide | 18
8 Verifying System Operation
Front Panel LED
Verify basic operations by checking the system LEDs located on the front panel. When operating
normally, the PWR and STAT LEDs should all display green.
Figure 23.
LED Condition Equipment Status
PWR
Off No power or in shutdown mode.
Solid Green System power good & BMC heating done
Blinking Green System power good but BMC is heating
Solid Yellow System power good but BMC heating fail
Blinking Yellow System power fail
PSU
Off Reserved
Solid Green All PSU work well
Blinking Yellow One or more PSU(s) fail
SYNC
Off
System timing synchronization is disabled or in free-run mode.
**Note: need NOS to activate this feature
Solid Green
System timing core (1588 and SyncE) is synchronized to external
timing source (ex: GNSS, 1PPS, PTP, BITS, etc)
**Note: need NOS to activate this feature
Blinking Green
System is synchronized in SyncE mode.
**Note: need NOS to activate this feature
Solid Yellow System timing core is in acquiring state or holdover mode.
Blinking Yellow
System timing synchronization fail.
**Note: need NOS to activate this feature
STAT
Off System (X86 & BMC) no boot
Solid Green
System boot complete
**Note: need NOS to activate this feature
Blinking Green System is booting