18
the warmer will change the direction within the scope of 60 degrees.
· Using method for remote-control type
1. “ON/1/2/3” button controls the heating power, continuous press of such key will cause the
warmer to have cycled change with its power.
2. “Oscillate” button controls the oscillating, the warmer can shake left and right for one press
and stop for another press.
3. “Standby” button controls the working state of the warmer.
4. “Timer” button controls the warmer to have random timing within 0.5h to 7.5h and it may
increase by 0.5h for each press, shown by indicators on the control panel. If all indicators on
the panel are off, it means the warmer under continuous working.
Users are allowed to operate either on the control panel or by the remote controller.
Technical parameters are subject to change without notice. All images are for illustration pur-
pose only.
TROUBLESHOOTING GUIDE
Possible operating anomalies
INCIDENT
CAUSE
SOLUTION
The device
does not
work.
Appliance not switched on.
Switch on the appliance
using the speed button.
The unit is on but the selected
temperature level in the thermostat is
lower than the temperature of the room.
Increase the temperature
level of the thermostat
(D)
Information requirements for electric local space heaters
Scuti
Item
Symbol Value Unit
Item
Unit
Heat output
Type of heat input, for electric
storage local space heaters only
Nominal heat
output
P nom
1,2
KW
Manual heat charge control,
with integrated thermostat
No
Minimum heat
output
(indicative)
P min
0,4
KW
Manual heat charge control
with room and/or outdoor
temperature feedback
No
Maximum
continuous
heat output
P max,c 1,2
KW
Electronic heat charge control
with room and/or outdoor
temperature feedback
No
Auxiliary electricity
consumption
Fan assisted heat output
No
Содержание Scuti
Страница 2: ...A C D B ...
