3
Section 5 Taking video
No matter which video mode you choose, the video record time is fixed each time. The video record
time can change at
“System setting
-
Video setting
-
Video time”
.
For example, Setting
Video time
at 60 seconds, the camera will save a file every 60 seconds. The
video is stored in sections. When the memory is full, the camera will auto delete the oldest file to
save the latest video file.
1.
Taking video by remote control
After turn on the camera and keep the LCD screen off, you can press “
Remote control video
key
” on remote control device, the camera will take video automatically. Press that key again,
the camera will stop videoing.
2.
Automatic taking video
Pressing “Arm” key of the remote control, the camera will be under arm (defense) status. If
infrared sensor detects body signal, the camera will begin taking video. ( if the camera was on by
battery power alone , the automatic video will delay 3 seconds.)
3.
Taking video Manually
ON the camera and press back key
, the LCD screen will work. Press directional key
right-side
key, the camera will begin videoing, you can see
“
●REC
”
flash on the left hand
side of LCD screen, video time will be displayed on the right hand side, the video will stop when
you press back
key.
Section 6 Check video
ON the camera and press back key
, the LCD screen will on ,then press directional key
right-side key, all stored video file can be checked, played or deleted.
First of all, you can see all the folders, each folder is named by 8 digital as date and sequence
