UFESA PAC Alaska 7, Инструкция по эксплуатации, Страница: 53 / 200

53
4. Activating the sleep function: The appliance can be put to Sleep function only when
it is in COOL mode (11). Press the Sleep mode button (2) to activate this function.
The upper fan will function in slow speed. The set temperature will increase by 1℃ after
one hour of functioning and by 2℃ after two hours. After six hours, the appliance will stop.
Remarks:
The main control board has a memory function. The main control board records the
previous operation mode before the appliance is put to Sleep function. Consequently,
as you restart the appliance, it will work in the previous operation mode. It doesn’t need
to be reprogrammed. This function is not available if the previous operation mode is
Automatic (15).
Windows should be kept closed when the air conditioner is in COOL mode (11) or DEHU-
MIDIFER mode (14). Otherwise, the water tank will fill up quickly.
5. Timer:
The timer (3) can be set between 1 to 24 hours. Press the or - to increase or de-
crease the duration. Each press increases or decreases the time by one hour.
- Automatic OFF: when the appliance is running, press the timer button (3) and set the
desired duration after which the appliance will be switched off. Number of hours will
flash on the LED display flashes for a few seconds until the timer indicator light on the
left illuminates. Afterwards, the LED display will resume displaying the set temperature.
- Automatic ON: when the appliance is connected to electricity but not turned on, press
the timer button (3), set the desired duration after which the appliance will be turned
on. Number of hours will flash on the LED display for a few seconds until the LED display
goes off, and the timer indicator light on the left remains illuminating.
HOW TO USE THE REMOTE CONTROL
To operate the air conditioner with the remote control, point the remote control at the
signal receptor located at the front of your appliance.
The remote control operates the portable air conditioner only if it is used within 5 meters.
1. Power button: The appliance will start or stop when this button is pressed .
2. Mode button: Allows you to select one of the following operation modes: Automatic,
Cool, Dehumidifier or Fan.
3. Speed button: Allows you to select the speed of fan (Slow or Fast).
4 and 5: Buttons to change the temperature and the time.
6. Sleep mode button: Allows you to activate or cancel Sleep Mode.
7. Timer button: Allows you to set the automatic switch-on or switch-off by the timer.