UFESA Capsule, Инструкция по эксплуатации

Страница: 19 / 62

19
The appliance must be used on a level, stable heat-resistant surface. The first time you use your Air
Fryer there may be a slight odor or a small amount of smoke given off. This is normal and is just the
manufacturing residues burning off.
Always place the ingredients to be fried in the basket to prevent it from coming into contact with
the heating elements.
Unplug the product immediately from the mains in the event of any breakdown or damage and
contact an official technical support service. In order to prevent any risk of danger, do not open the
device. Only qualified technical personnel from the brand´s Official technical support service may
carry out repairs or procedures on the device.
B&B TRENDS SL.
disclaims all liability for damages that may occur to people, animals or objects,
for the non-observance of these warnings.
BEFORE ITS FIRST USE
1. Remove all packing materials and stickers from the inside and outside of the Air Fryer. Gently
wipe down exterior with a damp cloth or paper towel.
WARNING: Never immerse the Air Fryer or its plug in water or any other liquids.
2. Pull the basket handle to remove the basket from the Air Fryer. Use the tray handle, in the center
of the tray, to remove the tray. Use a sponge and warm, soapy water to wash the inside and outside
of the basket and tray. The basket and the tray are top-rack dishwasher safe.
3. WARNING: Do not use abrasive cleaning agents or scouring pads.
4. Dry thoroughly.
HOW TO USE
1. Insert the power plug into an earthed wall socket.
2. Carefully pull the pan out of the air fryer
3. Put the ingredients in the pan,
Caution: Never use the pan without the baking tray installed.
4. Slide the pan back into the air fryer.
Caution: Do not touch the pan or tray during and for some time after use, as they get very hot. Only
hold the pan by the handle.
5. Turn the temperature control knob to the required temperature. See the setting guide inclu-
ded to determine the right temperature.
6. Determine the required preparation time for the ingredient. Again, see the settings guide.
7. To switch on the appliance, turn the timer knob to the required time.
Add 3 minutes to the time when the appliance is cold.
Operational Notes
- The heating light comes on until the required temperature is achieved.
- During the hot air frying process, the heating light comes on and goes out periodically. This
indicates that the heating element is turning on and off to maintain the set temperature.
- Excess oil from the ingredients is collected on the bottom of the pan.