UES perfectMelt, Руководство пользователя, Страница: 9 / 61

UES AG · Breuershofstr. 48 · 47807 Krefeld · Germany
Tel.: 0049-2151-72950 · Fax: 0049-2151-729578 · info@ues-ag.net · www.ues-ag.net
9
Example of a hot glue system
(Connecting parts are not supplied with the perfect Melt )
Tankdeckel Tank cap
Pumpe Pump
Tank Tank
Heißleim Hot glue
Inline Filter In-line filter
Tankfilter Tank filter
Heizschlauch Heat tube
Versorgungsblock Supply block
Düse Nozzle
Modul Module
The fuel tank cap closes the tank. After filling, please use the fuel tank cap to close the tank of your
perfect Melt system.
The hot glue is melted in the tank. Your
perfect Melt has two adjustable heating zones: the tank "t1" and
the manifold block "t2" (distribution block to connect the hot glue hoses).
The pump places the melted glue under pressure. UES-pumps have a translation ratio of 14:1. In other
words, at a set air pressure of 2 bar, there is a material pressure of 28 bar.
To prevent contamination in the hoses and application guns, the
perfect Melt has a (tank) glue filter.
The hot glue hoses
are connected to the glue dispenser. They are heated electrically and are connected
with the perfect Melt by a plug.
As an option, an in-line filter can be installed between the hose end and the gun.
The supply block is supplied with hot glue via the tube. It is also heated and is connected to the hose
electrically.
One or more modules are bolted onto the supply block. The modules open and close by air control (via a
solenoid valve).
For standard modules, screwable vents are necessary. Different nozzles are available for different
applications.