UES HP 07, Руководство по эксплуатации

Страница: 10 / 22

10
H
P 07 Operating Manual
UES AG · Roemerstraße 15 · D-47809 Krefeld
Tel.: +49 (0)2151-72950 · Fax: +49 (0)2151-7295578 · info@ues-int.net · www.ues-int.net
Handling
Module inset
The HP07 can be provided with three different module types. As standard it is delivered with the module
H300P. This module is technically based upon the UES standard module H300 so the entire UES nozzle
programme for this type of module can be used.
Optional the HP07 can be delivered with the module H300PNA. The model NA (Nadelsitz = needle seat)
offers the following advantages:
• Needle seat with integrated nozzle (0,20 mm – 1,5 mm)
• Special hardened needle seat
• Strong reducing of nozzle obstructions
• Angle hair is reduced to minimum
Using the module H300PSP the HP07 can be developed to a spraying version (refer to „Spraying applica-
tion on page 17).
The difference to spot and bead application (H300P / H300PNA) is that through the diagonal placed integ-
rated air drillings the ray of glue is put into a spiral motion. Hereby an extreme flat, sharp edged and nearly
invisible application is gained, which width and bead size can be individually regulated via air and pump
pressure.
Modules for H300P, H300PNA und H300PSP