UEi PowerDAQ PDXI-AO Series, Руководство пользователя

Страница: 55 / 69

Appendix B: Accessories
47
Appendix B: Accessories
Overview
The PowerDAQ AO boards can connect to a variety of
stand-alone or 19” rack-mount accessory panels. A complete
range of cables and options are available.
If you require a custom accessory, please contact the
factory.
These are following options available for use with
PowerDAQ AO boards:
•
The universal screw terminal PD2-AO-STP-32 includes
both analog and digital terminals and allows you to
connect Analog Output and Sense lines directly at the
screw terminal. May be used with all PowerDAQ AO
boards except PD2-AO-96 (note, that digital part of this
screw terminal still can be utilized)
•
PD-BNC-16/64. This BNC terminal connects each Analog
Output line using the BNC-terminated cable that allows
eliminating or reducing external noise. PD-BNC-16 may
be used with PD2/PDXI-AO-8 boards only. PD-BNC-64
may be used with all PowerDAQ AO boards except PD2-
AO-96.
•
PD-CONN-PCB – This small terminal panel is useful in
OEM applications but does not provide the ability to
connect the digital signals to/from the board
•
PD-STP-3716. This terminal connects sixteen analog
output channels to PD2/PDXI-AO-8 or PD2-AO-96
board. May be considered as a low cost termination
option
Cables: (PD[XI]-CBL-xx)
PD-CBL-96: The J1 connectors use a 96-way shielded
round 1-meter cable with a metal connector
on either end. It connects to: PD2-AO-STP-
xx, PD-BNC-xx accessory panels. Used with
all PD2-AO boards except PD2-AO-96.