6
A. Clamp:
Measure inductive AC/DC current. Opens to 1.25” (32.0mm).
B. Conductor Alignment Marks:
Use to aid the visual alignment of a
conductor when measuring inductive amperage. Greatest accuracy
is achieved when the conductor inside the clamp is centered at the
intersection of these marks.
C. Worklight:
Lights clamp area in dark work environments.
D. Category Max Indicator:
Maximum CAT Rating for clamp jaw.
E. NCV Alert Light:
Indicates voltage when in NCV (Non Contact Voltage)
mode and High Voltage alert.
F. Clamp Lever:
Opens and closes current clamp jaw.
NOTE:
The clamp uses a high-tension spring to close the jaw. Do not
allow fingers or objects to become pinched in the base as the jaws close.
G. Rotary Selector Dial:
Set Rotary Selector Dial desired function
H. SELECT/Wireless (BT) Button
:
• Press to select AC or DC on Low Z setting, AC or DC on voltage
setting, AC or DC on Amps setting.
• Press to activate Ohms, Continuity, Diode, Capacitance on
Ohms/Continuity/Diode/Capacitance setting; AC or DC on Low amps
setting; T1, T2, T1 - T2 on temperature setting.
• Press and Hold to activate Wireless mode.
I. Range/Mode/
kHz
Button:
• Press to set manual range desired
• Press and hold Range/Mode/
kHz
Button to activate Low filter mode
J. Min/Max/Test Button:
• Press to capture Max reading
• Press again to capture Min reading
• Press again to capture Avg reading
• Press and hold return to Live readings
• Press and hold Min/Max/Test Button and Range/Mode/
kHz
Button to
activate Motor measurement test mode
Overview
S/N
LOCK
OPEN
U
X
V
W
30V
T
1
TEMP
T
2
True RMS
DL599
µA
Temp
BT
600V
600A
CAT IV
V
A
SELECT
Low Z
AUTO
V
A
M
N
O
I
J
R
S
T
Q
A
D
F
K
C
E
G
H
B
P
L
