3
INTRODUCTION
The CD100A Combustible Gas Leak Detector is capable of sensing many
combustible, non-combustible and toxic gases that include but are not
limited to the following:
Acetone
Industrial
Solvents
Alcohol
Jet
Fuel
Ammonia
Lacquer
Thinners
Benzene
Methane
Butane
Naphtha
Ethylene Oxide
Natural Gas
Gasoline-Petrol
Propane
Halon
Refrigerants
Hydrogen
Sulfide
Toluene
NOTE:
This leak detector is factory calibrated for methane in air.
WARNING!
This unit should not be used for detection of
Carbon Monoxide.
Features include
• Fully adjustable steady tic rate accelerates as the sensor tip
approaches a leak (the adjustment knob is located on the side of the unit)
• “Tip-Light” in sensor cover used to see around the area of leak in a
dark environment
• Long 18” flexible gooseneck
• Audible and visual leak indicator
• Low battery indicator and separate battery compartment for
easy replacement
• Power On light
• Solid state semiconductor sensor provides instantaneous detection
• Sensor cover to protect sensor
• Ruggedized protective rubber boot
• Socket for optional earphone
