7
N. Function Dial:
Turns on meter and is used to select the function.
O.
Display:
• High contrast backlit dual display.
• AC Amps Upper display
• All other readings in Lower Display
P. Select Button:
• Used to choose measurement mode from a single dial selection; AC or
DC volts, continuity, diode, AC or DC low amps, ˚F or ˚C in temperature mode.
Q.
Thermocouple Temperature Input
R.
Category Max Indicator:
Maximum CAT Rating for input jacks.
• Multifunction input port used for measuring: AC or DC volts, resistance,
continuity, diode, capacitance, AC or DC µA and temperature.
• Use CATIII test leads or higher
S. Hertz/Duty Cycle Button
(Hz/Duty):
• Press once in voltage mode to enter Hz mode
• Press again to enter duty cycle mode
• Press again to return to voltage mode
T.
Input Jack Lock:
Switch to use Temperature or Test lead inputs
U
.
Test Lead Inputs
V. Magnetic Mount:
For hands-free work.
W. Battery Cover:
Easy access for replacing batteries.
X. Serial Number
Y. Test Lead Holders:
For storing test leads when not in use.
Apo:
Auto power off after 30 minutes of use.
OVERVIEW (CONT.)
FCC/IC INFORMATION
NOTE:
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and,
if not installed and used in accordance with instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in any particular installation. If this equipment
does cause harmful interference to radio or television reception, which can
be determined by turning the equipment on and off, the user is encouraged
to try and correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
CAUTION
Changes or modifications not expressly approved by the
manufacturer responsible for compliance could void the user’s authority to
operate the equipment.
This device complies with Industry Canada license - exempt RSS
standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that
may cause undesired operation of the device.
www.
.com
1.800.561.8187
