Starting and Stopping Logging
Memory clear, and PC communications are in accessible during logging.
Recall function is enabled during logging.
1. Set the time and the logging interval, see “
How to Change
Setup Options
”.
2. Press “ “ momentarily to start logging. The display
shows “
LOG
“.
3. Press “ “ momentarily again to stop logging.
Clearing Memory
When memory is full, “ “ appears in the secondary display and
logging stops. You can clear memory in normal or
MIN/MAX
mode.
1. Press “ “ for more than 1 second to display “ “ in the
“
RECALL
” mode.
2. Press “ “ for more than 1 second again to delete all logged
readings from memory.
3. Press “
“ momentarily or turn off the thermometer to stop
clearing memory.
Viewing Logged Readings
1. Press “ “ momentarily to display the last logged reading. If
there is no logged readings, “ “ appears in the secondary
display, and the thermometer returns to the previous mode.
2. Press “ “ to scroll through the logged readings. The display
shows each logged reading and its time stamp, which is
displayed 2 seconds after its memory location appeared in the
secondary display.
3. Press “
“ momentarily to step through the minimum,
maximum, average, and currently logged reading.
4. (DT302) Press “ “ momentarily to display the logged readings
you want to view. Press “ “ for more than 1 second to display
differential values between the logged readings you want to view.
12
