- 21 -
Changing bulbs
1. Remove the screws (45). Press the catches (35) and carefully
lift up the tail light unit (9).
2. With the cable (44) of the tail light unit (9), carefully lift up the
cover (37) and thread it out in the direction of the arrow.
3. Remove the tail light unit (9) completely from the holder (36).
4. Remove the screws (38) and take off the lens (39).
Attention
When changing bulbs the vehicle ignition must be switched off
and the plug for the lights removed from the towbar electrical
socket. Failure to do so can result in a short circuit or other
damage. If you are not sure, have the bulbs replaced by a
specialist workshop.
Note
The lamp change is described and illustrated using the left tail
light unit on the bicycle rack. The procedure is the same for the
right tail light unit.
Note
When ordering a new bulb, you must specify which bulb it
is (14, 15, 16, 17).
Designation
Spare part
no.
14
Indicator
a
BL C5W 12 V yellow
a
Commercially available bulb.
E1687
15
Number plate light
a
BL C5W 12 V (35 mm long) white
E1687
16
Rear fog light
a
for left tail light unit
BL PR21W 12 V red
E1687
Reversing light
a
for right tail light unit
BL P21W 12 V white
E1687
17
Brake / tail light
a
BL P21/5W 12 V white
E1687
15
14
17
16
M+P-25A-0204
35
37
44
36
37
9
8
8
36
45
M+P-25A-0255
38
39
38
M+P-25A-0221
