- 12 -
4. Attach the bracket (9) at the bicycle frame. Tighten the
clamp (23) with the rotary handle (24) and lock with the key (4).
Pull out the key (4).
5. Pass the lashing strap (22) between two wheel spokes, thread
into the buckles (25) and tighten (arrow) with the tensioning
lever (26).
Mounting the second bicycle
The second bicycle is mounted in the same manner as the first.
Note that the bicycles are mounted in opposite directions.
The second bicycle is attached using the long bracket (10).
Mounting the third bicycle
3
The third bicycle is mounted in the same manner as the first.
Note that the bicycles are mounted in opposite directions.
The third bicycle is attached to the second bicycle with the
additional bracket (2).
Removing bicycles
The bikes are removed in the reverse order.
Attention
Do not tighten the lashing straps (22) too firmly, otherwise the
lashing straps (22) and/or the tyres/rims could be damaged.
Tightening the lashing straps (22) places these under tension.
To loosen this tension, the catch (21) may need to be
pressed firmly.
Note
The threaded screws on the bracket must be cleaned and
greased at regular intervals to avoid the rotary handles getting
stuck.
M+P-25A-0162
23
4
24
26
22
25
9
10
M+P-25A-0163
Attention
Only attach the bracket (10) to the bicycle frame, as other parts
of the bicycle could be damaged. Do not pinch components
such as gear or brake cables.
Faulty clamps must be replaced immediately.
3. Uebler F32 hitch rack for 3 bicycles
(Order no. 15731)
Attention
Only attach the bracket (2) to the bicycle frame, as other parts
of the bicycle could be damaged. Do not pinch components
such as gear or brake cables.
Faulty clamps must be replaced immediately.
2
M+P-25A-0164
