uebe cyclotest baby, Инструкция по эксплуатации

Страница: 80 / 170

EN-80
General provisions
Guidance and manufacturer’s declaration - electromagnetic immunity
The device is intended for use in the electromagnetic environment specified below.
The customer or the user of the device should ensure that it is used in such an
environment.
Immunity test IEC 60601
test level Compliance level Electromagnetic environ-
ment - guidance
Electrostatic
discharge (ESD)
IEC 61000-4-2 ±6 kV contact
±8 kV air ±6 kV contact
±8 kV air Floors should be wood, con-
crete or ceramic tile. If floors
are covered with synthetic
material, the relative humid-
ity should be at least 30 %.
Electrical fast
transient/burst
IEC 61000-4-4 ±2 kV for power
supply lines
±1 kV for input/
output lines N/A Mains power quality should
be that of a typical commer-
cial or hospital environment.
Surge
IEC 61000-4-5 ±1 kV differen-
tial mode
±2 kV common
mode N/A Mains power quality should
be that of a typical commer-
cial or hospital environment.
Voltage
dips, short
interruptions
and voltage
variations on
power supply
input lines IEC
61000-4-11 <5% U
T
(>95%
dip in U
T
) for 0.5
cycle
40% U
T
(60%
dip in U
T
) for 5
cycles
70% U
T
(30%
dip in U
T
) for 25
cycles
<5% U
T
(>95%
dip in U
T
) for
5 sec
N/A Mains power quality should
be that of a typical commer-
cial or hospital environment.
If the user of the device
requires continued operation
during power mains interrup-
tions, it is recommended that
the device be powered from
an uninterruptible power
supply or a battery.
Power frequency
(50/60 Hz)
magnetic field
IEC 61000-4-8 3 A/m 3 A/m Power frequency magnetic
fields should be at levels
characteristic of a typical lo-
cation in a typical commercial
or hospital environment.
NOTE U
T
is the a.c. mains voltage prior to application of the test level.