BOLT
UDOO BOLT User Manual - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: S.B. - Reviewed by L.V. Copyright © 2019 SECO S.p.A.
9
1.4
Safety
The UDOO BOLT board uses only extremely-low voltages.
While handling the board, please use extreme caution to avoid any kind of risk or damages to electronic components.
CE and FCC certification retained using only the UDOO BOLT qualified Power Supply Unit (19V Brick Power Adapter). When not using UDOO BOLT qualified Power
Supply, use 19VDC (min 60W power) PSUs certified for your country (make sure that the power cable is less than 3 mt. long).
1.5
Electrostatic discharges
The UDOO BOLT board, like any other electronic product, is an electrostatic sensitive device: high voltages caused by static electricity could damage some or all
the devices and/or components on-board.
1.6
RoHS compliance
The UDOO BOLT board is designed using RoHS compliant components and is manufactured on a lead-free production line. It is therefore fully RoHS compliant.
This product should be operated in a well-ventilated environment and, if used inside a case, the case should not be covered.
This product should be elevated on a stable, flat, electrically non-conductive surface whilst in operation, and clear from any object that can
induce a short-circuit.
Do not expose it to water, moisture or heat from any source; UDOO BOLT is designed for reliable operation at normal ambient room
temperatures.
Avoid handling the warm and moving parts (like the fan) and generally the printed circuit board while it is powered
Only handle by the edges to minimise the risk of electrostatic discharge damage.
Take care whilst handling to avoid mechanical or electrical damage to the printed circuit board and connectors. Also use a grounded
wrist strap or touch a safely grounded object before you handle components.
