5.5 phones
This output allows a stereo headphone to be connected. When
connected the speaker is muted and master control sets the over-
all volume.
(!) Note: Please use headphones with stereo
jack plugs (TRS) for operation only.
5.6 send - return, external effect loop
The device is equipped with an additional output (send) and input
(return) that operate as a loop allowing e.g. an external effect-unit
to be connected and used. Send and return are mono and the loop
is parallel to the signal path to keep the original signal unaffected.
The pan control will work on both effects, internal and external, at
the same time in the same way.
5.7 line out - line 1, line 2
The device offers two line outs that differ in output level. Line 2
delivers a standard line level suitable for being connected to e.g.
mixing consoles. Line 1 has less output and allows e.g. a soundcard
to be connected directly with less risk of distorting the digital
input of the soundcard.
5.8 aux in
Aux-in is an additional 3,5mm TRS stereo input to connect your
playback device to. Left and right channel of your playback device
are mixed and directly forwarded to the power amp.
5.9 DI ch 1, DI ch 2
The device offers two equally leveled electronically balanced DI-
outs to make the individual channel preamp signals available. This
enables better and more interference-free signal processing of the
individual channels. Due to intended strict channel separation the
DI outs have to be dry, without effect.
5.10 mains voltage input module
The mains-supply relevant parts are combined in the mains volta-
ge input module:
IEC mains power cable connector,
fuse holder with spare fuse and
illuminated mains switch.
... and now have fun playing music and enjoy the sound of the
DaCapo 7
5.
11
