Warning: Must be attended to while charging
①
②
③
Battery power is low in the original factory, It must be fully charged before use.
Transmitter charging
Connect the transmitter with the charging line of the original plant, and then connect
other USB charging outlets. When charging, the transmitter indicator flashes circularly,
and when charging is completed, the indicator will be on for a long time.
Power adapter (not included)
Original Charging
Line
▲
Only use the original USB charging cable.
Input: 5V
,
2A
Installation of phone holder and phone
④
Place the phone in
the upper and lower
clamps Between, the
clamp will automatically
clamp the mobile phone .
Notice: Don't clip the buttons
on the side of the phone.
②
Disassemble
Pull up the clip on
the mobile phone
①
Press to unlock the lock
①
②
Put the phone clip
onthe back of the quasi-
remote controller
and push it to the end.
Straightening the antenna
Installation
③
Pull up the clip on the mobile phone.
