udir/c U52G, Руководство по эксплуатации, Страница: 9 / 24

8
www.udirc.com
Propeller installation diagram
1. To remove the screw by screw driver in counter clockwise,and remove the
damaged propeller upwards(picture 9).
2. To install the new propeller,make sure the propeller rotated direction is correct
first, and then mount propeller on transmission shaft of the motors and press
down, and then tighten the screw.
Picture 9
1. To remove the motor, remove the screw from the lampshade first,then take the
lampshade out, unplug the motor connector from LED board and then take the
damaged motor out.
2. To install the motor, plug the required motor connector into the LED board
socket, and put the motor into motor holder.
Put on the motor cover and tighten the screw.
Notice: The motor is consumable. If it’s damaged, please contact with local
seller or distributor to buy the new motors for replacement.
Motors Replacement
Picture 10
Suggestions for motor using:
It’s normal that after using for a period of time, the motor performance will
decrease, so please purchase a new one for replacement.