Transmitter Battery Installation
Battery Charging
Battery installation: Open the battery cover of the transmitter. Install four 1.5V AA
batteries to battery box in accordance with the positive and
negative pole indication, and then close the battery box.
Battery Box
Battery Cover
Connect the battery with USB wire, and then connect the USB with the computer or
the adapter. The USB light is red when charging and turns to green when fully
charged. The charging time is about 220 minutes. Please cut off the charging wire
after fully charged.
3
4
Picture for RC Boat Main Structure
Display Support Holder
Forward Trim
Backward Trim
Power Indicator Light
Left Rudder Trim
Right Rudder Trim
Power Switch
Rudder Knob
Throttle Trigger
Capsize Switch
Steering
Engine Rod
Steering
Rudder
Propeller
Navigation Rudder
Balance Rudder
Outlet
Hull
Cabin Cover
Cabin Cover Switch
