Contact Resistance Tester MRL-11
TO SET TIME
Go to start menu as per figure ‘1’. Bring cursor to ‘Time’ by
key and display shows as
figure ‘9’ below:
Fast measure
Measure
Data
Time PC
Figure 9
Press ‘Enter’ key and the display is as figure ‘10’ below:
02 - 14 - 14
15 : 33
Setting
Figure 10
Press ‘Enter’ key and the display is as figure ‘11’ below:
02 - 14 - 14
15 : 33
Stop ing
Figure 11
In figure ‘11’: Top left is ‘MONTH’; Top middle is ‘DATE’; Top right is ‘YEAR’.
Lower left figure is ‘HOUR’ and lower right is ‘MINUTES’.
If the figure selected by cursor is to be changed, press ‘Enter’ key and every one press will
increase to next numerical. When desired numerical is reached, move cursor to next figure
by
key to the figure to be changed and press ‘Enter’ key to increase the numerical. In
this sequence, complete date and time can be set. After complete setting is done, cursor
goes to ‘Stoping’ and display is as figure ‘12’ on next page:
