UD Trucks LKC371, Книга бодибилдера

Страница: 4 / 385

IMPORTANT NOTICE
This Book has been prepared to provide intermediate and final stage
manufacturers with basic data, such as mass and dimensions, of the
chassis-cab manufactured by Nissan Diesel Motor Co., Ltd. This Book is
not intended to provide instructions or authorization by Nissan Diesel
Motor Co., Ltd. for modification, alteration or completion of any vehicle
and nothing contained herein is to be regarded as providing any such
instructions or authorization. Nissan Diesel Motor Co., Ltd. and Nissan
Diesel America, inc. shall not be responsible for any modification, alter-
ation or completion of the vehicle which shall be the responsibility of sub-
sequent stage manufacturers.
The chassis-cab manufactured by Nissan Diesel Motor Co., Ltd. is
designed to comply with applicable Federal Emission Control Regula-
tions, Federal Noise Emission Control Regulations, and Federal Motor
Vehicle Safety Standards applicable at the time of manufacture. State-
ments relating to the compliance of the chassis-cab manufactured by Nis-
san Diesel Motor Co., Ltd. in compliance with the Federal Motor Vehicle
Safety Standards (FMVSS) are set forth solely in the Document for
Incomplete Vehicle accompanying each chassis-cab and nothing con-
tained herein is to be regarded as a statement relating to compliance with
the FMVSS.
Various regulations relating to vehicle performance, equipment, and
safety have been issued by the Department of Transportation. These reg-
ulations include, but are not limited to the Federal Motor Vehicle Safety
Standards and the Federal Motor Carrier Safety Regulations. Other fed-
eral, state and local regulations may also apply. Final stage manufactur-
ers and motor carriers are responsible for knowing and complying with all
regulations that may apply to the vehicle. A finished vehicle may also
require devices that are not specified in the regulations. Body builders,
subsequent stage manufacturers and carriers must determine what safety
devices are necessary for the safe operation of the vehicle. Nothing in
this book should be taken as a representation that all equipment neces-
sary for the safe operation of the vehicle in its intended use has been
installed on the incomplete chassis-cab.
All illustrations and specifications in this Body Builder’s Book are based
on the latest information and believed to be correct. The numerical val-
ues used herein are for standard dimensions and masses. Occasionally,
vehicle assembly tolerances may produce some variance in the actual
vehicle.
Nissan Diesel Motor Co., Ltd. and Nissan Diesel America, Inc. reserve
the right to make changes in materials, equipment, information, specifica-
tions and models and to discontinue models or equipment at any time
without notice and without incurring obligation.
Additional copies of this Book may be obtained from your Nissan Diesel
America, Inc. authorized dealer or Nissan Diesel America, Inc. Inquiries
about the contents of this Book or requests for technical information
should be directed to Nissan Diesel America, Inc., P.O. Box 152034, Irv-
ing, Texas 75015-2034.
-1-