Assembly Steps
08
Wiring
09
Wiring
10
Wiring
12
Wiring
13
Wiring
14
Wiring
15
Wiring
11
Insert the output controller RD6006 and
keep clamped in the mounting hole
Connect the FireWires(L) of power
switch and switching power supply with the brown wire
Connect the FireWires(L) of power switch and power
socket with the brown wire
Connect the Neutral wires(N) of switching power supply
and power socket with the blue wire
Connect the Ground wire of power socket (E) to the Ground
wires of switching power supply (〨) with the double color wire
Connect the power
line of the fan to the
output terminals of
the switching power
supply, and insert the
2 pin power supply
wire of the fan into
the holder
Fan
If any problem, feel free to contact us.
Website: www.uctronics.com
Email: [email protected]
Assemble the upper cover plate
and fix with the screws 11 ,Mount
the pads with the screws 12
NOTE:
1. The wiring requests a high level of expertise, non-professionals must not
operate, otherwise, there is a risk of fire and explosion.
2. Please check and switch the input power 110V or 220V before power on
to avoid damage
