Uconnect Touch 8.4, Руководство пользователя

Страница: 27 / 149

steering wheel to accept the call. You can also
press the “answer” button on the touchscreen or
press the caller ID box.
Answer Or Ignore An Incoming Call — Call
Currently In Progress
If a call is currently in progress and you have
another incoming call, you will hear the same
network tones for call waiting that you normally
hear when using your mobile phone. Press the
“Uconnect Phone”
button on the steering
wheel, answer button on the touchscreen or
caller ID box to place the current call on hold
and answer the incoming call.
NOTE: The Uconnect Phone compatible
phones in the market today do not support
rejecting an incoming call when another call is in
progress. Therefore, the user can only answer
an incoming call or ignore it.
Do Not Disturb
With Do Not Disturb, you can disable notifica-
tions from incoming calls and texts, allowing you
to keep your eyes on the road and hands on the
wheel. For your convenience, there is a counter
display to keep track of your missed calls and
text messages while you were using Do Not
Disturb.
Do Not Disturb can automatically reply with a
text message, a call or both, when declining an
incoming call and send it to voicemail.
Automatic reply messages can be:
•
“I am driving right now, I will get back to you
shortly.”
•
Create a custom auto reply message up to
160 characters.
NOTE: Only the first 25 characters can be seen
on the touchscreen while typing a custom mes-
sage.
While in Do Not Disturb, Conference Call can be
selected so you can still place a second call
without being interrupted by incoming calls.
NOTE:
•
Reply with text message is not compatible
with iPhones.
•
Auto reply with text message is only avail-
able on phones that support Bluetooth
MAP.
Place/Retrieve A Call From Hold
During an active call, press the “Hold” button on
the Phone main screen.
Making A Second Call While Current Call Is
In Progress
You can place a call on hold by pressing the
“Hold” button on the Phone main screen, then
dial a number from the dialpad, recent calls,
SMS Inbox or from the phonebooks. To go back
to the first call, refer to “Toggling Between Calls”
in this section. To combine two calls, refer to
“Join Calls” in this section.
Toggling Between Calls
If two calls are in progress (one active and one
on hold), press the “Swap” button on the Phone
main screen. Only one call can be placed on
hold at a time.
You can also push the Phone button to
toggle between the active and held phone call.
Join Calls
When two calls are in progress (one active and
one on hold), press the “Join Calls” button on
the Phone main screen to combine all calls into
a Conference Call.
Call Termination
To end a call in progress, momentarily press the
Phone “End”
button on the touchscreen or
the Phone “End” button on the steering wheel.
Only the active call(s) will be terminated and if
there is a call on hold, it will become the new
active call.
Redial
Press the “Redial” button on the touchscreen, or
push the Phone
button and after the “Listen-
ing” prompt and the following beep, say “Re-
dial.”
The Uconnect Phone will call the last number
that was dialed from your mobile phone.
Call Continuation
Call continuation is the progression of a phone
call on the Uconnect Phone after the vehicle
ignition has been switched to OFF.
26