Uconnect 6.5N, Дополнение к руководству пользователя, Страница: 31 / 54

Send Messages Using Soft-Keys:
You can send messages using Uconnect®
Phone. To send a new message:
•
Touch the “Phone” soft-key,
•
Touch the “messaging” soft-key then “New
Message”,
•
Touch one of the 18 preset messages and
the person you wish to send the message to,
•
If multiple numbers are available for the
contact select which number you would like
to have the message sent,
•
Press “Send” or “Cancel”.
Send Messages Using Voice Commands:
•
Press the button,
•
After the “Listening” prompt and the following
beep, say “Send message to John Smith
mobile”,
•
After the system prompts you for what mes-
sage you want to send, say the message you
wish to send or say “List”. There are 18
preset messages.
While the list of defined messages are being
read, you can interrupt the system by pressing
the
button and saying the message you
want to send.
After the system confirms that you want to send
your message to John Smith, your message will
be sent.
List of Preset Messages:
1. Yes.
2. No.
3. Okay.
4. I can’t talk right now.
5. Call me.
6. I’ll call you later.
7. I’m on my way.
8. Thanks.
9. I’ll be late.
10. I will be <number> minutes late.
11. See you in <number> minutes.
12. Stuck in traffic.
13. Start without me.
14. Where are you?
15. Are you there yet?
16. I need directions.
17. I’m lost.
18. See you later.
Bluetooth® Communication Link
Mobile phones have been found to lose connec-
tion to the Uconnect® Phone. When this hap-
pens, the connection can generally be reestab-
lished by switching the mobile phone OFF/ON.
Your mobile phone is recommended to remain
in Bluetooth® ON mode.
Power-Up
After switching the ignition key from OFF to
either the ON or ACC position, or after a lan-
guage change, you must wait at least 15 sec-
onds prior to using the system.
30