Uconnect 5.0, Руководство пользователя

Страница: 97 / 298

if required to enter your PIN followed with a pound, (3 7
4 6 #), you can press the
button and say, “Send 3 7 4
6 #”. Saying “Send” followed by a number, or sequence of
numbers, is also to be used for navigating through an
automated customer service center menu structure, and
to leave a number on a pager.
You can also send stored mobile phonebook entries as
tones for fast and easy access to voice mail and pager
entries. For example, if you previously created a Phone-
book entry with First and/or Last Name as “Voicemail
Password”, then if you press the
button and say
“Send Voicemail Password” the Uconnect
威
Phone will
then send the corresponding phone number associated
with the phonebook entry, as tones over the phone.
NOTE:
•
The first number encountered for that contact will be
sent. All other numbers entered for that contact will be
ignored.
•
You may not hear all of the tones due to mobile phone
network configurations. This is normal.
•
Some paging and voice mail systems have system time
out settings that are too short and may not allow the
use of this feature.
•
Pauses, wait or other characters that are supported by
some phones are not supported over Bluetooth
威
.
These additional symbols will be ignored in the dialing
a numbered sequence.
Barge In — Overriding Prompts
The button can be used when you wish to skip part
of a prompt and issue your voice command immediately.
For example, if a prompt is asking “There are 2 numbers
with the name John. Say the full name” you could press
the
button and say, “John Smith” to select that
option without having to listen to the rest of the voice
prompt.
6
Uconnect
姞
8.4A 95