Cocoon 500 / 600
13
ENGLISH
4. PERSONALISATION
4.1 ADJUSTING SPEAKER VOLUME
There are two ways to set the speaker volume:
4.1.1 Speaker volume during call
During conversation, press the up
or down
key to change the volume accordingly.
4.1.2 Set the default speaker volume
1.
Enter the menu by pressing
/OK
2.
Select HANDSET using the up
and down
keys
3.
Press OK
4.
Select EAR VOL using the up
and down
keys
5.
Press OK
6.
Select the desired volume (1 to 5 ) by means of the up
and down
key.
7.
Press OK
A double bleep confirms the validation of your choice
Note: The handsfree volume is also adjust together with the receiver in the handset as above described .
4.2 ADJUSTING THE RING VOLUME
4.2.1 Handset ring
1.
Enter the menu by pressing
/OK
2.
Select HANDSET using the up
and down
keys
3.
Press OK
4.
Select RING VOL using the up
and down
keys
5.
Press OK
6.
Select the desired volume (OFF or 1 to 5 )
7.
Press OK to confirm or
to return to the previous menu.
4.2.2 Base ring
1.
Enter the menu by pressing
/OK
2.
Select SETUP using the up
and down
keys
3.
Press OK
4.
Select BASE VOL using the up
and down
keys
5.
Press OK
6.
Select the desired volume (OFF or 1 to 5 )
7.
Press OK to confirm or
to return to the previous menu.
4.3 CHOOSING THE RING MELODY
The base and each handset can ring with a different melody.
The handsets can ring with a different melody according to whether the incoming call is internal or external.
4.3.1 Base melody
1.
Enter the menu by pressing
/OK
2.
Select SETUP using the up
and down
keys
3.
Press OK
4.
Select BASE MEL using the up
and down
keys
5.
Press OK
6.
Select the melody of your choice ( 1 to 5 ) using the up
and down
keys
7.
Press OK to confirm or
to return to the previous menu.
Note: Every programmation is confirmed at the end by a double or single long beep. A double bleep
confirms the validation of your choice
A long bleep signifies that the modification has not been taken into account.
Cocoon500_eur.book Page 13 Friday, June 20, 2003 2:49 PM