11
24
Installation
GPS Device
To use a GPS device with the UCLEAR HBC220 SNOW, the two must first be paired.
Pairing the HBC220 SNOW to a GPS Device
•Turn on the HBC220 SNOW helment communicator and GPS device
•To connect the helmet communicator to a GPS device, hold the Up and Down buttons
for 2 seconds. This puts the helmet communicator into paring mode. The status indicator
will blink blue and red alternately.
•Next, turn on the GPS device Bluetooth functions and search for Bluetooth audio devices.
Select ‘HBC220 SNOW’ to pair with the desired device.
•If your GPS device prompts for a passcode, enter ‘0000’.
•Your GPS device will confirm that pairing has succeeded.
*Note: To make calls through the HBC220 SNOW, you may need to pair your mobile phone
to the GPS device by following the instructions of the GPS device.
Install Speakers
• Use the plastic inserts (optional) to ensure a firm and
secure mounting area for the speaker.
• Insert the plastic inserts in the ear pocket/pads. If necessary
carefully trim the plastic inserts with a pair of scissors to fit helmet.
• The microphones MUST be placed
facing toward your mouth.
• Left and right speakers must be installed
symmetrically.
• Make sure the speaker wire is inserted into the main unit.
lnsert the speaker wire into the control unit until you can no longer see the
3 ribs on the speaker wire plug.
Your UCLEAR HBC220 SNOW helmet communication system comes with 3 types
of mounting brackets: a goggle attachment clip, a side mounted helmet strap
and a metal mounting bracket. Use any one of the brackets to install the HBC220
control unit onto your helmet.
EN
EN
