General Operations
Your
HBC120 helmet communicator is now setup
and ready to go!
Up
button
General Operations
Charging the Unit
•
To charge the helmet communicator, connect the provided
charging cable to the speaker/ charging socket. Upon
Answer/Music
Toggle button
Speaker/
charging
Status socket
indicator
Down
button
The operations described here are applicable to all modes
of operations.
Power On
•
Hold the Answer button for 2 seconds to power on the helmet
communicator. The status indicator will blink blue and a
power up tone can be heard.
Power Off
•
To switch off the helmet communicator, press and hold the
Answer button for 5 seconds. The status indicator will blink
red 5 times followed by a long beep before fully shutting
down.
Power Save Mode (Auto Power Off)
•
If the intercom feature has been in use, and all other
Bluetooth devices have been disconnected, the system will
auto shutdown in 1 hour. If the intercom feature has not been
in use and the HBC100 has not connected to any other device,
the system will auto shutdown in 10 minutes.
Low battery
•
When the battery level is low, the status indicator light will
flash red twice every 2 seconds while emitting a warning
beep every minute.
charging, if the unit is on, the system will automatically
initiate power down.
Volume Control
•
The volume control of the helmet communicator can be
controlled using the Up and Down buttons. Pressing the Up
or Down button will increase the volume respectively.The
volume control for each mode is independent of each other.
Automatic Speaker Loudness (Communication only)
•
The speaker loudness will be automatically adjusted
depending on the environment noise level. However you can
still adjust the volume manually.
Automatic Pairing
•
The helmet communicator has the ability to connect to the
last paired device automatically for two features - music and
mobile
phone.
•
Automatic pairing of the helmet communicator with music
devices is dependent on the music devices.
Automatic Profile Switch
•
The helmet communicator supports multiple profiles
concurrently, but at any point of time only one profile is
active. The automatic profile switch determines which profile
should be active at any point of time starting from the highest
priority: (1) Mobile Phone functions (2) Intercom functions
and (3) Music functions.
•
The helmet communicator can be paired to more than 1 device.
However to achieve the most out of the helmet communication,
we do not recommend pairing more than 2 devices to the helmet
communicator at one time
