AeroDieCut OPERATION MANUAL
26
⑧
Set a new Die board.
・
Set the Die board is under the left and right metal fittings.
・
Set the Die board by pressing it firmly to the left opposite.
・
Tighten the blade die fixing knob to prevent the blade die from tilting.
⑨
Reattach to the Protective plate.
⑩
Reattach to the Press plate.
Note.
Depending on the shape of the Die board, it may not be held down by the holding metal
fittings and the Press plate may rise.
Floating of the Press plate may cause malfunction. If the Press plate is floating, increase
the fixing points with the attached Hexagon socket head cap screw and fix it.
Do not place anything on the Press plate as it may cause a malfunction.
NG
OK
