UBSAN Q4 FPV, Инструкция по эксплуатации

Страница: 17 / 22

8.6 REVERSING CHANNEL SETUP
If you would like to reverse any of the stick functions due to personal preference then follow
the instructions below. Be aware that it will change the controls back to front.
Pull the throttle stick to the lowest position and long press the Pitch stick simultaneously to
enter into MAIN MENU interface. Push the Elevator stick up/down to select “Set Reverse”.
Select “Exit” to exit.
8.7 SENSITIVITY SETUP
Sensitivity default setting is in Normal Mode.
17
©
2015 Hubsan
哈博森科技 版权所有
0:08:49
MAIN MENU
0:08:49
Set Reverse
Play Record
Set Real Time
Format SD Card
Set Reverse
Set Sensitive
5.8G Frequence
Normal
Exit
Normal
Elevator
Rudder
Aileron Revers
0:08:49
MAIN MENU
0:08:49
Set Sensitive
Elevator :
Aileron :
Rudder : 50
50
50
Play Record
Set Real Time
Format SD Card
Set Reverse
Set Sensitive
5.8G Frequence
Normal mode
Exit
If you would like to change the sensitivity of any of the stick functions then follow the
instructions below.
Pull the throttle stick to the lowest position and long press the Elevator stick to enter into
the MAIN MENU interface. Push the Elevator stick up/down to select “Set Sensitivity”, push
the tick right to enter into the “ Set Sensitivity” interface, select “Expert mode” or “ Normal
mode”. Select” Exit” to exit.