background image

2.Quadcopter

3Quadcopter battery

3.1 Introduction

The quadcopter battery is a rechargeable Li-Po battery with 2700mAh capacity and 7.4V 

voltage.The battery should only be charged with Hubsan charger to avoid overcharge.

2.1 Quadcopter motor LED indicator

Front LED is blue; Back LED is red.
1.Power on: 4 LED indicators blink simultaneously.
2.Compass Calibration:
    1). Horizontal calibration: 4 LED indicators blink circularly.

    

2). Vertical  calibration: 4 LED indicators blink alternately .

3.Quadcopter Horizontal Calibration: 4 LED indicators blink slowly.
4.Quadcopter Rotation Calibration: 4 LED indicators blink circularly.
5.GPS Flight: 4 LED indicators will remain solid.
6.Low Voltage Return : 2 front LED indicators remain solid, and 2 back LED indicators blink 
   quickly.
7.Signal Lost: 2 front LED indicators blink alternately, 2 back LED indicators remain solid.
8.LED indicators can be turned off by long pressing the lower throttle trim on the transmitter.

 Please make sure the battery is fully 

 charged before the first time use.

X-Hubsan  H501A

5

3.2 Installing the battery

Push the battery into the battery compartment (as shown below) and connect the battery 

cable with the correct polarity then close the battery compartment cover.

1

6

7

2

3

4

8

9

5

Propeller B
Lower Body Shell

1080P Camera

Propeller A

Motor

LED Light

Battery Compartment

TF Slot

[10]

Upper Body Shell

Rubber Feet

Содержание H501A





























Отзывы: