Ublox XPLR-IOT-1, Руководство пользователя

Страница: 20 / 39

XPLR-IOT-1 - User guide
UBX-21035674 - R02 Platform description Page 20 of 39
C1-Public
Table 10 describes the SWITCH_1 and SWITCH_2 signals that are connected to pushbutton switches
and control signals from NORA-B1. This allows NINA-W15 system functions, as described in the data
sheet and system integration manual.
NINA-W15 pin PCBA button Control signal from NORA-B1
GREEN/SWITCH_1 BTN4 SARA_INT/NINA_SW1
SWITCH_2 BTN5 MAX_SAFEBOOT/NINA_SW2
Table 10: NINA-W15 switch signals
See also the NINA-W15 data sheet [8] and system integration manual [9] .
3.4.3 SARA-R510S – cellular
SARA-R510S provides LTE-M and NB-IoT connectivity through its UART and AT command set.
Cellular is a second method of providing a network connection for the MQTT messages. A wide-band
cellular antenna from Taoglas (PCS.66.A) is mounted on the PCBA for cellular connectivity in
supported bands from 600 MHZ to 6 GHz
[19] . See also the SARA-R5 data sheet [13] and system
integration manual [14] .
Figure 14 shows the LTE antenna and eSIM. An I2C connection between SARA-R5 and MAX-M10
provides direct communication of GNSS data without involving NORA-B1.
Figure 14: LTE antenna and eSIM