VERA-P1 series - Data Sheet
UBX-17004377 - R06_draft
Qualification and approvals
Page 20 of 30
Confidential
6
Qualification and approvals
6.1
Approvals
8
Products marked with this lead-free symbol on the product label comply with
the "Directive 2002/95/EC of the European Parliament and the Council on the
Restriction of Use of certain Hazardous Substances in Electrical and Electronic
Equipment" (RoHS).
VERA-P1 series V2X modules are RoHS compliant.
6.1.1
European Union regulatory compliance
TBD
6.1.2
FCC compliance
The VERA-P1 series modules comply with Part 95, Subpart L and Part 90, Subpart M of the FCC Rules.
Operation is subject to the following two conditions:
1.
This device may not cause harmful interference, and
2.
This device must accept any interference received, including interference that may cause
undesired operation.
⚠
Non authorized modification could void authority to use this equipment. The internal / external
antenna(s) used for this module must provide a separation distance of at least 20 cm from all
persons and must not be co-located or operating in conjunction with any other antenna or
transmitter.
These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and,
if not installed and used in accordance with the manufacturer’s instructions, may cause harmful
interference to radio communications.
☞
The outside of final product that contains the VERA-P173 or VERA-P174 module must display in
a user accessible area a label referring to the enclosed module. This exterior label can use wording
such as the following: “Contains Transmitter Module FCC ID: XPYVERAP174” or “Contains FCC ID:
XPYVERAP174”.
6.1.3
FCC IDs
Model
FCC ID
VERA-P173
XPYVERAP174
VERA-P174
XPYVERAP174
Table 14: FCC IDs for different models of VERA-P1 series
6.1.4
Certification in other countries
TBD
6.2
Approved antennas
Please refer to the
VERA-P1 series antenna reference design [2] for the essential specifications to be
fulfilled in the end-product design to make use of the module’s radio type approval. It provides PCB
layout details and electrical specifications as well as information about approved antennas.
8
These approvals are pending.
