NINA-W1 series - User Manual
5.3
Canada (ISED)
The NINA-W106, NINA-W136, NINA-W156 and NINA-B226 modules are certified for use in Canada
under Innovation, Science and Economic Development Canada (ISED) Radio Standards Specification
(RSS) RSS-247 Issue 2 and RSSGen.
5.3.1
Labeling and user information requirements
The final host device, into which this RF Module is integrated has to be labeled with an auxiliary label
stating the IC of the RF Module, such as:
“Contains transmitter module IC: 8595A-NINAW106
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science
and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following
two conditions:
1.
This device may not cause interference.
2.
This device must accept any interference, including interference that may cause undesired
operation of the device.
Le périphérique hôte final, dans lequel ce module RF est intégré "doit être étiqueté avec une
étiquette auxiliaire indiquant le CI du module RF, tel que"
“Contient le module émetteur IC: 8595A-NINAW106
L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR
d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio
exempts de licence. L’exploitation est autorisée aux deux conditions suivantes :
1.
L’appareil ne doit pas produire de brouillage;
a.
L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est
susceptible d’en compromettre le fonctionnement.
Model
IC
NINA-W106
IC: 8595A-NINAW106
NINA-W136
IC: 8595A-NINAW106
NINA-W156
IC: 8595A-NINAW106
NINA-B226
IC: 8595A-NINAW106
Table 05: IC for NINA-W106, NINA-W136, NINA-W156 and NINA-B226
5.3.2
RF exposure
This equipment complies with the requirements of IC RSS-102 issue 5 radiation exposure limits set
forth for an uncontrolled environment.
Having a separation distance of minimum 40 mm between the user and/or bystander and the
antenna and /or radiating element ensures that the output power (e.i.r.p.) of NINA-W106, NINA-
W136, NINA-W156 and NINA-B226 is below the SAR evaluation Exemption limits defined in RSS-102
issue 5.
All transmitters regulated by ISED must comply with RF exposure requirements listed in RSS-102 -
Radio Frequency (RF) Exposure Compliance of Radiocommunication Apparatus (All Frequency
Bands). This module is approved for installation into mobile and/or portable host platforms and
must not be co-located or operating in conjunction with any other antenna or transmitter except in
accordance with Industry Canada's multi-transmitter guidelines. End users must be provided with
transmitter operating conditions for satisfying RF Exposure compliance.