EVK-W262U - User Guide
UBX-15020900 - R04
Getting started
Page 11 of 16
Connect to device
Select the device you want to connect to and press Connect Peer to establish a connection. If the other device is
also an ODIN-W2, it accepts and establishes the connection. If there are other devices, some actions must be
taken.
Figure 8: Connecting to peer in s-center
Send data to other device
The easiest way is to enter data mode by clicking the Data Mode button or type ATO1. All the data that is typed
in the console window is sent to the other device.
If ODIN-W2 is in AT-Mode it is unable to send or receive any data.
Figure 9: Switching to data mode in s-center
