EVK-F9T - User guide
UBX-21040453 - R01
Setting up
Page 7 of 23
C1- Public
USB
Default messages activated as in UART1. Input/output protocols available as in
UART1.
I2C
Compatible with the I2C
industry standard, available for communication with an
external host CPU or u-blox cellular modules, operated in slave mode only. Default
messages activated as in UART1. Input/output protocols available as in UART1.
Maximum bit rate 400 kb/s.
SPI
Allow communication to a host CPU, operated in slave mode only. Default
messages activated as in UART1. Input/output protocols available as in UART1.
SPI is not available unless D_SEL pin is set to low.
Table 3: Default configuration
☞
Refer to the ZED-F9T Integration manual [
] for more information.
